Skip to content
Petal

FixesMac6 min read

Wispr Flow not pasting text: recover your transcript

Wispr Flow not pasting text? Recover it with Paste last transcript (Control-Command-V) or History, then reset Accessibility for the main Flow app.

Published by Optimal Apps, the maker of Petal.

On this page

With Wispr Flow not pasting text, the transcript is usually not lost. Click in a text field and press Control-Command-V (Paste last transcript) to paste it, or copy it from Transcript history. Then fix the cause: on a Mac, turn the main Wispr Flow app off and on in System Settings > Privacy & Security > Accessibility, quit Flow completely, and reopen it.

This guide starts with recovery, because the text you just spoke matters more than the setting. Then it covers the causes, one by one.

Quick-fix checklist

What you see Cause Fix
Dictation ended, no text in the field Paste failed after a good transcription Press Control-Command-V in the field
Control-Command-V does nothing Modifiers held, or no focused field Click in the field, press and release all keys
Text still missing Shortcut blocked in this app Use Copy last transcript (Control-Command-C), then Command-V
Need an older dictation Not the last transcript Open Transcript history and copy the row
Fails in every app Accessibility grant is stale Reset Accessibility for the main Flow app, quit, reopen
Fails in one app only That app refuses the paste Test in Notes, then use the app's own paste command
"Select a textbox first, then dictate." No field had focus Click Copy in the notice, then paste

Step 1: Wispr Flow not pasting text? Recover it first

Do not dictate again before you recover the text. A new dictation replaces the last transcript.

Use Paste last transcript (Control-Command-V)

  1. Click inside an editable text field. Confirm the cursor blinks there.
  2. Press Control-Command-V, then release all three keys.
  3. If you changed the shortcut, use your own shortcut. Check it in Flow under Settings > General > Shortcuts.

Why it works: Flow keeps the last transcript and can insert it again on demand. Wispr notes that if you hold the modifier keys, the shortcut does not fire, so release them fully.

Paste last transcript is also in the Flow menu bar icon menu and the Flow Bar context menu. Note that Paste last transcript cancels a dictation that is still processing.

Copy it instead of a paste

If Control-Command-V does not work in that app:

  1. Press Control-Command-C (Copy last transcript). Or, in the Wispr Flow menu bar, choose Dictation > Copy last transcript.
  2. Click in the field and press Command-V.

This path uses the app's normal paste, so it works in apps that block simulated input.

Copy from Transcript history

For a dictation that is not the most recent:

  1. Open Transcript history from the Flow Bar context menu.
  2. Click a successful row to copy it, or hover over the row and choose Copy transcript.
  3. Paste it into your app.

Failed or empty rows show Retry when the recording is at least 5 seconds long and less than 14 days old. Dismissed or unfinished rows show Recover with the same 14-day limit. A retry from History updates the row but does not paste into your app, so copy it after the retry ends.

If you turned on a never-store setting, History shows History disabled, and nothing can be copied or retried.

Step 2: Fix Wispr Flow text not appearing in any app

If no app gets the paste, the Accessibility grant is the most likely cause. macOS needs it before an app can send a paste to another app.

  1. Open System Settings > Privacy & Security > Accessibility.
  2. Find Wispr Flow. Make sure it is the main app, not a helper process.
  3. If it is on, turn it off, then on again. Enter your password if macOS asks.
  4. Quit Flow completely from the menu bar icon. Closing the window only hides Flow.
  5. Reopen Flow from Applications.
  6. Dictate a short phrase into Notes.

Why it works: after an app update, macOS can keep a grant that points to the old app signature. The switch shows "on", but the new copy of Flow is not trusted. A toggle and a full relaunch create a fresh grant.

If Wispr Flow is not in the list at all, reinstall it into /Applications. The full permission reset, with the Microphone step, is in Wispr Flow not working on Mac. For a general guide to this setting, see Accessibility permission not working on Mac.

Step 3: Keep the field focused until the paste

Flow pastes where the cursor is when the dictation ends. If you click another window, the desktop, or a different tab while Flow processes, the paste has no target.

  1. Click in the field before you start to dictate.
  2. Stay in that field until the text appears.
  3. If you see "Select a textbox first, then dictate.", click Copy in the notice and paste the text yourself.

Step 4: Fix a paste that fails in one app only

Test in Notes first. If Notes works, Flow is fine and the target app is the problem.

  • Terminals and IDEs. Some terminals and editors use a different paste command, such as Shift-Command-V or a right-click menu. Copy the transcript and paste with the app's own command. Read Dictation not working in VS Code or Terminal for details on these apps.
  • Remote desktops and virtual machines. Citrix, RDP, and VDI sessions need clipboard sharing turned on. Without it, the paste stays on your Mac.
  • Web apps in a browser. Some rich editors load slowly. Click in the field again and use Paste last transcript.
  • Password and secure fields. macOS blocks simulated input into secure fields. Type these by hand.

Step 5: Check the clipboard behavior

Flow uses the clipboard for a short time to insert text, then restores the supported contents after a successful insertion. If a slow app reads the clipboard late, it can get the old content instead of the transcript. If you see your old clipboard text, use Paste last transcript to insert the correct text.

How Petal handles a missed paste

If paste failures keep coming back, it helps to know how other apps solve the same problem. Petal for Mac is a free, open-source dictation app from Optimal Apps, the publisher of this site. It runs the speech model on your Mac, and it makes the transcript hard to lose.

  • Every transcript goes to History. By default, Petal saves each transcript and its audio in a folder in your Documents: ~/Documents/petal/history/. The Save History menu in Settings > History controls what Petal keeps. You can open it in Finder from Settings > History > History Folder. The file stays on your Mac after a restart or a crash.
  • Recent Transcripts in the menu bar. Click the Petal menu bar icon and click a row under Recent Transcripts to copy it.
  • Paste Last Transcription shortcut. In Settings > General, record a shortcut for Paste Last Transcription to paste your most recent text again.
  • Transcribe Again. If a model gave a bad result, the History card has Transcribe Again, because the audio is still there.
  • A late clipboard restore. Petal waits 700 ms before it puts your old clipboard back, because Electron apps such as VS Code read the clipboard late. If you copy something new in that time, Petal keeps your new copy. You can turn this off with Restore Clipboard in Settings > Recording.
  • A clear fallback. If Accessibility is off, Petal copies the transcript instead of a paste, so you can press Command-V.

Petal needs the same Accessibility permission as Flow. The difference is that speech recognition runs on your Mac, so there is no network step that can fail between the recording and the text. For a full comparison, read Petal vs Wispr Flow. If another app has the same problem, see Superwhisper not pasting text.

Summary

  1. Click in a field and press Control-Command-V to paste the last transcript.
  2. If that fails, use Control-Command-C and Command-V, or copy the row from Transcript history.
  3. Reset Accessibility for the main Wispr Flow app, quit Flow fully, and reopen it.
  4. Keep the field focused until the text appears.
  5. Test in Notes to find out if one app refuses the paste.

Questions

Is my text lost when Wispr Flow does not paste?

Usually not. Wispr says a failed paste does not mean a failed transcription. Press Control-Command-V in a text field to paste the last transcript, or copy it from Transcript history.

What is the Wispr Flow paste last transcript shortcut?

On Mac, the default is Control-Command-V. Copy last transcript without a paste is Control-Command-C. On Windows, the defaults are Alt-Shift-Z and Alt-Shift-X. Press and release all keys, because held modifiers stop the shortcut.

Why does Wispr Flow paste in some apps but not others?

The field must have focus when the dictation ends. Terminals, IDEs, remote desktops, and apps with a different paste command can also refuse the paste. Test in Notes to see if the problem is in one app.

How long can I retry a failed Wispr Flow dictation?

Wispr says recordings older than 14 days cannot be retried. Retry appears on failed or empty rows that are at least 5 seconds long.

FixesiPhone

Wispr Flow keyboard not working on iPhone

Wispr Flow keyboard not working on iPhone? Turn on Allow Full Access, grant the mic in the app, stay signed in, and set a longer Disable Flow after time.