FixesiPhone7 min read
Wispr Flow keyboard not working on iPhone
Wispr Flow keyboard not working on iPhone? Turn on Allow Full Access, grant the mic in the app, stay signed in, and set a longer Disable Flow after time.
Published by Optimal Apps, the maker of Petal.
On this page
If you have the Wispr Flow keyboard not working on iPhone, the cause is almost always one of four things: Allow Full Access is off, the main Flow app does not have the microphone, you are signed out, or the keyboard session ended. Turn on Allow Full Access in Settings > General > Keyboard > Keyboards > Wispr Flow, open Flow and grant the microphone, sign in, and set Flow Settings > General > Disable Flow after to a longer time. The rest of this guide explains why each step matters.
Quick-fix checklist
| Symptom | Cause | Fix |
|---|---|---|
| Keyboard says it needs setup, mic does nothing | Allow Full Access is off | Turn on Allow Full Access, then return to Flow |
| Keyboard opens the Flow app each time | No live session, or the session expired | Let Flow return you, then set a longer Disable Flow after |
| Mic button does nothing | Signed out, or Flow closed in the background | Sign in; wait half a second before you tap again |
| "Flow needs your microphone" | Another app uses the mic | Close the other app or end a call or Notetaker meeting |
| "Couldn't start audio capture" | Audio session failed to start | Dismiss, tap the mic again, or force quit Flow |
| Orange dot stays on | Session keeps the mic open | End the session from Dynamic Island or Control Center |
| Keyboard or mic missing from Settings | Settings shows old data | Force close Settings and reopen it |
Wispr Flow keyboard not working on iPhone: why it happens
iOS gives third-party keyboards very little power. A keyboard extension cannot record from the microphone on its own. So every voice keyboard on iPhone, Flow included, uses a workaround: the keyboard asks its main app to record.
The first time you tap the mic, the keyboard opens the Flow app. Flow starts a recording session, then sends you back to the app where you type. While that session is open, the Flow app keeps the microphone ready in the background, and the keyboard can start a dictation without a switch.
This explains most problems:
- If the session ends, the next tap opens the Flow app again.
- While the session is open, the microphone stays in use, so iOS shows the orange dot.
- If the Flow app is signed out or has no microphone grant, the keyboard has nothing to talk to.
Step 1: Turn on Wispr Flow Allow Full Access
The keyboard needs Full Access to talk to the main app.
- Open the Wispr Flow app and finish onboarding. Wispr says the keyboard does not appear in Settings until you tap Get started in the app.
- Open Settings > General > Keyboard > Keyboards.
- If Wispr Flow is not in the list, tap Add New Keyboard and choose Wispr Flow under Third-Party Keyboards.
- Tap Wispr Flow in the list.
- Turn on Allow Full Access, then tap Allow.
- Return to the Wispr Flow app. Setup moves forward when it detects Full Access.
If setup still says Full Access is missing, open Flow, tap Finish setup, then Go to settings, and turn it on there. Wispr notes that if you close the setup helper, that does not confirm the change.
If the keyboard or the Allow Full Access switch is missing from Settings, force close the Settings app and open it again.
Step 2: Grant the microphone to the Flow app
The keyboard does not ask for the microphone. The main app does.
- Open Settings > Privacy & Security > Microphone.
- Turn on Wispr Flow.
- If Wispr Flow is not in the list, open the app, sign in, and complete the microphone step in onboarding.
In the Flow app, the "We can't hear you" card on Home has a Go to Settings button that opens the right page.
Step 3: Stay signed in
Wispr says that starts from outside the app do nothing while you are signed out. If the mic button in the keyboard does nothing at all, open Flow and check that you are signed in.
If Flow closed in the background, wait half a second before you tap the mic again. Wispr notes that rapid repeated taps delay recovery.
Step 4: Fix the Wispr Flow keyboard opening the app each time
If the keyboard opens the Flow app on each dictation, the session ends too soon.
- Open the Flow app.
- Go to Settings > General > Disable Flow after.
- Choose a longer time. The options are Never, 1 hour, 15 min, 5 min (the default), and Immediately.
Why it works: this setting ends an idle session while Flow is in the background and the keyboard is not in use. A longer time keeps the session open between dictations, so the keyboard does not need to open the app. The setting is per device, so set it on each iPhone.
When Flow does open, return the way Wispr suggests: tap OK for automatic return, or swipe right across the bottom edge of the screen. If you return within about 10 seconds and the session is ready, the dictation continues. A return that reopens the target app from the Home Screen can reload it and lose your place.
Some events stop the session, and it does not resume by itself: a phone call or other audio interruption, a headset or Bluetooth device that connects or disconnects, and an audio output change when the built-in mic is not selected.
Step 5: Free the microphone
If Flow shows "Flow needs your microphone" or "Can't turn on Flow right now", another app uses the mic. Close that app, end the call, or end a Notetaker meeting. Then tap Retry or dictate again.
If you see "Couldn't start audio capture", dismiss the error and tap the mic again. If it repeats, force quit Flow and reopen it.
Step 6: Fix the Wispr Flow orange dot that stays on
The orange dot is not a bug. It shows that Flow still holds the microphone for an open session, or that a dictation is still processing.
- If Flow is processing, wait. The dot should clear when it finishes.
- To end the session, use one of these controls:
- In the keyboard, tap the check button to stop and keep your text. Do not tap X, which discards the dictation.
- Expand the Dynamic Island and tap the stop control.
- Open Control Center and turn off the Flow toggle.
- If the dot stays on, force quit Flow: swipe up from the bottom, then swipe Flow off the top.
- If a Live Activity stays on screen, open Flow. If it remains, open Settings > Apps > Wispr Flow > Live Activities and turn it off and on.
- To end idle sessions sooner, set Disable Flow after to 5 min or Immediately.
Step 7: Recover text that did not arrive
Keep the Flow keyboard visible until the text arrives. If it did not insert:
- Open the Flow app and go to History.
- Swipe a row with text and choose Copy.
- Paste it into your app.
Failed rows start Retry when you tap them, if the audio is still on the device. Some apps and company policies block third-party keyboards entirely. In those apps, dictate in Notes and paste the text.
The Petal keyboard: the same model, with the audio saved first
If you want to try a different keyboard, it helps to know that no third-party keyboard on iPhone can avoid the main-app rule. Petal - AI Voice Recorder, from Optimal Apps (the publisher of this site), uses the same live-session model. What differs is how it handles the session and your audio.
- Setup asks for everything up front. The Petal app asks for the microphone and speech recognition, offers a speech model download, and then shows you how to add the keyboard and turn on Allow Full Access. Because each grant happens during setup, a dictation does not show a system alert.
- A Live Activity shows the session. While the session is open, the Lock Screen and Dynamic Island show it, with stop and turn-off buttons. You can see why the mic is in use and end it in one tap.
- You choose how long the mic stays ready. The Keep Microphone Ready setting offers 5 Minutes, 15 Minutes, or 1 Hour.
- The audio is saved before transcription. Petal saves each recording before it starts to transcribe. If the transcription fails or the app is interrupted, the recording is still there.
- On-device transcription. Petal transcribes on the iPhone with the speech model you download. If you skip the download, it uses Apple speech recognition.
- Searchable history. Each recording and transcript is kept in a history that you can search.
Petal is free to download, with an optional Petal Pro subscription. For a deeper look at voice keyboards, read iPhone dictation keyboard. If Apple's own dictation fails too, read iPhone dictation not working, or compare options in iPhone dictation alternative.
Summary
- Turn on Allow Full Access in Settings > General > Keyboard > Keyboards > Wispr Flow, then return to Flow.
- Grant the microphone to the Flow app, and stay signed in.
- Set Disable Flow after to a longer time so the keyboard does not open the app each time.
- Close other apps that use the mic.
- End the session from the Dynamic Island or Control Center to clear the orange dot.
- Copy missing text from History in the Flow app.
Questions
Why does the Wispr Flow keyboard open the app?
iOS does not let a third-party keyboard record audio by itself. The keyboard starts a session in the main Flow app, which records, and then returns you to the app you typed in. If the session is still open, later dictations start without the switch.
Why does the orange dot stay on after I use Wispr Flow?
The orange dot means an app still uses the microphone. Flow keeps the mic open during a session so the next dictation starts fast. End the session from the Dynamic Island or Control Center, or set Flow Settings > General > Disable Flow after to a shorter time.
Where is Allow Full Access for Wispr Flow?
Open Settings > General > Keyboard > Keyboards, tap Wispr Flow, turn on Allow Full Access, and tap Allow. Then return to the Flow app so setup can detect it.
Is there a keyboard that saves my audio if transcription fails?
Petal - AI Voice Recorder for iPhone saves the audio before transcription starts, so a failed or interrupted transcription does not lose the recording. Its keyboard uses the same live-session model as Flow, with a Live Activity.