FixesMac7 min read
Willow Voice not working on Mac: permissions and keychain
Willow Voice not working on Mac? Fix the v1.8.4 Accessibility and keychain prompts, the wrongly signed build, connection errors, and the wrong microphone.
Published by Optimal Apps, the maker of Petal.
On this page
When you see Willow Voice not working on your Mac, the cause is usually one of four things: the v1.8.4 update reset Accessibility and caused keychain prompts, a wrongly signed v1.8.4 build made macOS treat Willow as a new app, the internet connection dropped during transcription, or Willow is listening to the wrong microphone. Update to v1.8.4.2 or later, reset Willow in Accessibility, and check the microphone in Willow's Audio Settings. The steps below follow Willow's own help center articles.
Quick-fix checklist
| Symptom | Likely cause | Fix |
|---|---|---|
| Text does not paste, Accessibility looks on | v1.8.4 or v1.8.4.1 permission reset | Update to v1.8.4.2+, remove Willow from Accessibility with "–", restart, turn it on again |
| Repeated keychain dialogs | v1.8.4 keychain issue | Delete the com.seewillow.WillowMac or gotrue.supabase keychain item, sign in once |
| macOS asks for Accessibility or Input Monitoring again after an update | Wrongly signed v1.8.4 build | Download the latest app from the Willow website, delete the old app, install fresh |
| "Microphone Access Denied" | Microphone grant lost | Press the Willow hotkey and click "Allow" |
| Transcription fails or text is partial | Unstable connection | Retry from Local Transcript History on stable Wi-Fi |
| Poor accuracy, clipped words | Wrong microphone or AirPods | Pick the built-in or a wired microphone in Audio Settings > Microphone |
Willow Voice not working after the v1.8.4 update
Willow published a help article for macOS users on v1.8.4 and v1.8.4.1. On those versions, macOS permissions can reset and keychain prompts can appear again and again. Willow fixed this in v1.8.4.2. If you stay on the older build, the permissions can reset again, so update first.
Step 1: Update Willow
- Open Willow on your Mac.
- Choose Check for Updates.
- Install v1.8.4.2 or later.
Step 2: Reset Accessibility for Willow Voice
A toggle that shows "on" does not always mean that macOS trusts the current copy of the app. macOS ties the Accessibility grant to the app's code signature. When the signature changes, the old grant can stay visible but stop working. Removing the entry forces macOS to create a new grant.
- Open System Settings > Privacy & Security > Accessibility.
- Select Willow Voice and click the – button below the list.
- Quit and restart Willow.
- When Willow Voice appears in the Accessibility list again, turn it on.
- Restart Willow one more time.
Step 3: Approve the microphone again
If Willow shows "Microphone Access Denied" after the restart, press your Willow hotkey. When macOS asks for microphone access, click Allow. You can also check the toggle in System Settings > Privacy & Security > Microphone.
For a longer walkthrough of this permission, see how to fix the Mac microphone permission.
Fix Willow Voice keychain prompts
Willow stores your sign-in session in the macOS keychain. If the stored item belongs to an older build, macOS can ask again each time Willow reads it. Willow's help center gives an advanced fix for this:
- Open Keychain Access. On macOS 26, search for it with Spotlight (Command-Space), because it is no longer in the Utilities folder.
- In the sidebar, select login, then Passwords.
- Search for
com.seewillow.WillowMacorgotrue.supabase, the item name that the prompt shows. - Delete that item.
- Reopen Willow, sign in once, and click Always Allow when macOS asks to save the item.
Delete only the Willow items. Other keychain items hold passwords for other apps.
The wrongly signed v1.8.4 build
Willow has a second help article about one v1.8.4 build that was signed incorrectly. It was available for about one day. If you installed it, you can see these symptoms:
- Extra permission or keychain prompts
- macOS asks for Accessibility or Input Monitoring access again
- Keychain access dialogs
- macOS treats the update as a new app
The cause is the signature, not your settings. macOS uses the signature to decide if two copies of an app are the same app. A different signature means new permission records. Willow says this is expected macOS behavior and not a security issue.
To fix it:
- Download the latest version from the Willow website. This makes sure that you get a correctly signed build.
- Quit Willow and move the old app from Applications to the Trash.
- Install the new download.
- Approve each macOS permission prompt that appears.
If Accessibility still does not work after the fresh install, do Step 2 above again. For more detail on stale Accessibility grants, read Accessibility permission not working on Mac.
Willow Voice transcription failure: connection and audio
Willow's article on dictation quality and transcription failure says that Willow needs a stable connection to transcribe. Willow sends your audio to its servers for transcription. If the connection drops while it uploads, the dictation can fail or come back partial.
Recover the failed dictation
- Open Local Transcript History in Willow.
- Find the most recent dictation that did not finish.
- Click Retry transcription. Willow says that you can need one or two tries.
On iPhone, press and hold the latest transcript to copy it or transcribe it again.
Check the connection
- Confirm that Wi-Fi is connected in System Settings > Wi-Fi.
- If you use a VPN or a company proxy, turn it off for a test.
- Dictate one short sentence. If it works without the VPN, ask your IT team to allow Willow through it.
Wrong microphone: the most common accuracy cause
Willow's help center calls the wrong microphone the most common cause of poor results. A Mac can switch the input device when you connect or disconnect headphones, a dock, or a display with a camera. Willow then records a quiet or distant microphone.
- In Willow, open Audio Settings > Microphone and select the microphone you speak into.
- Open System Settings > Sound, and select the same device in the Input tab under Output & Input.
- Raise the Input volume slider and watch the input level meter move when you speak.
AirPods and other Bluetooth microphones
Willow says that AirPods and other Bluetooth microphones can use lower-quality audio, connect when you do not expect it, and clip the start or end of speech. Willow suggests that you keep AirPods for sound output and use the Mac's built-in microphone for input. Our guide to AirPods and Bluetooth microphone dictation on Mac explains why this happens.
Other causes from the same article:
- Background noise. Fans, traffic, and echo reduce accuracy.
- Low input volume. Audio that sounds fine to you can be too quiet for the model.
- Distance and volume. Speak clearly at a normal volume, close to the microphone.
- Temporary glitches. Quit Willow fully and open it again after you change devices or networks.
If none of these steps help, contact Willow support from the help center with your macOS version and Willow version.
When to consider an on-device alternative
Willow is a capable product, and the fixes above solve most problems. Two parts of its design stay the same, though: Willow's help center says transcription needs a stable connection, and sign-in uses the keychain. If those are the parts that fail for you, an app that runs on your Mac avoids them.
Petal for Mac is a free, open-source (MIT) menu bar dictation app from Optimal Apps, the publisher of this site. You press a shortcut, speak, and Petal pastes the text into the front app.
- On-device speech. Petal runs speech models such as Parakeet and Whisper Large V3 Turbo on your Mac. After you download a model, dictation works with no connection.
- On-device cleanup. Petal W1, a small cleanup model, removes filler words and fixes punctuation on your Mac. Cloud cleanup is optional and uses your own OpenAI, Anthropic, or OpenRouter key, or a local Ollama or LM Studio server.
- No account. Petal has no sign-in, so there is no session item in the keychain to break. If you add a cloud key, Petal stores it in the macOS keychain.
- Microphone choice. In Settings > Recording > Microphone, you can pin the built-in microphone, so AirPods stay on output only.
Petal still needs Microphone and Accessibility permission, like every dictation app that pastes text. It needs an Apple silicon Mac for its local models. If you also use Windows, Petal for Windows is a separate open-source app with local Whisper and Parakeet models.
If you are comparing paid cloud tools, read the Wispr Flow alternative guide or the best dictation app for Mac overview.
Questions
Why does Willow Voice keep asking for keychain access?
Willow's help center links repeated keychain prompts to v1.8.4 and v1.8.4.1. Update to v1.8.4.2 or later. If the prompts continue, delete the com.seewillow.WillowMac or gotrue.supabase item in Keychain Access, then sign in once and allow Willow to save it.
Why did Willow Voice lose Accessibility permission after an update?
One v1.8.4 build was signed incorrectly for about a day, so macOS treated it as a new app. Download the latest version from the Willow website, delete the old app, install it fresh, and approve the permission prompts.
Does Willow Voice work without the internet?
Willow's own help article says Willow needs a stable connection to transcribe. If your Wi-Fi drops, retry the dictation from Local Transcript History when you are back online.
Why is Willow Voice less accurate with AirPods?
Bluetooth microphones such as AirPods use a lower-quality audio mode and can clip the start or end of speech. Willow recommends the built-in microphone or a good wired microphone for input.
Is there an offline alternative to Willow Voice on Mac?
Petal for Mac is free and open source. Its speech models and its Petal W1 cleanup model run on your Mac, so dictation works without a connection after you download a model.