Skip to content
Petal

FixesiPhone6 min read

Otter.ai not transcribing or stuck on Live

Otter.ai not transcribing? Check the recorded audio first, let paused or Live recordings finalize, and do not reinstall when a recording is missing.

Published by Optimal Apps, the maker of Petal.

On this page

If you find Otter.ai not transcribing a recording, first check if Otter recorded the audio at all. Play the recording back. If the audio is there, the problem is upload or processing, and you can usually fix it by reopening Otter on the same device and letting it finish. If the recording is stuck on "Live", the original device must come back online to finalize it. If the recording is missing, do not reinstall Otter, because that can delete audio that never uploaded. The steps below follow Otter's own help center articles on recording problems.

Quick-fix checklist

Symptom Likely cause Fix
Recording shows "Live" for hours Original device went offline or to sleep Reopen Otter on that device, connect to a network, wait a few minutes
Recording ended by itself Paused for about 20 minutes Start a new recording after long breaks
Transcript has gaps Lost connection, app closed early, phone call Keep Otter open until upload and processing finish
No audio in the recording Microphone blocked or used by another app Check Settings > Apps > Otter > Microphone, close call apps
Recording missing Audio never uploaded Do not reinstall; send diagnostics to Otter support
Live transcript stops on Mac Screen and audio permission missing Turn on Otter in Screen & System Audio Recording

Otter.ai not transcribing? Check the recorded audio first

Otter does two jobs: it records audio, then it transcribes that audio on its servers. The fix depends on which job failed.

  1. Open the conversation in Otter.
  2. Play the audio from the start, then skip to the middle and the end.
  3. If you hear your audio, Otter recorded it. Go to Step 2 or Step 3.
  4. If the audio is silent or very short, Otter did not hear the microphone. Go to Step 4.

This test takes one minute and stops you from changing settings that were never the problem.

Step 2: Fix an Otter recording stuck on Live

A recording shows "Live" while Otter still expects audio from the device that started it. Otter's help center says that a new recording does not fix an old one. The old recording needs its original device to come back online so it can finalize and process.

  1. Find the device that made the recording: your iPhone, your laptop, or a browser tab.
  2. Open Otter on that device. On a laptop, open the lid and wake it.
  3. Connect the device to Wi-Fi or cellular data.
  4. Keep Otter in the foreground for a few minutes, so the recording can finalize.
  5. Check the conversation again on any device.

Otter also says not to switch devices during one recording. If you start on your iPhone and want to continue on the web, stop and finalize the recording on the iPhone first. Then start a new recording on the web.

Step 3: Let paused recordings finalize

Otter keeps a paused recording active for about 20 minutes. If the pause lasts longer, or the recording device becomes unavailable, Otter can finalize the session automatically. After that, you cannot resume it.

  • For a break of more than 15 minutes, stop the recording and start a new one after the break.
  • If a paused recording ended early, the audio before the pause is still in that conversation. Start a new conversation for the rest.

Why Otter transcripts can have missing parts

Otter lists these causes for gaps in a transcript:

  • The device lost its internet connection for some time.
  • You closed Otter before the audio finished uploading.
  • The recording stayed paused for a long time.
  • A phone call or another app took the microphone during the recording.

When you go offline, Otter keeps recording, but the live transcript pauses. If you stop the recording while offline, keep Otter open until it reconnects and uploads. On iPhone, do not force-close Otter (swipe it away) while a recording or an upload is in progress.

Step 4: Otter not recording audio on iPhone

If the playback is silent, iOS did not give Otter the microphone, or another app took it.

  1. Open Settings > Apps > Otter and make sure Microphone is on. You can also check Settings > Privacy & Security > Microphone.
  2. End any phone call, FaceTime call, or voice chat before you record. iOS gives the microphone to calls first.
  3. Close other recording apps, such as Voice Memos or a dictation keyboard session.
  4. Turn off Low Power Mode in Settings > Battery for long recordings, because it limits background activity.
  5. Turn on Background App Refresh for Otter in Settings > General > Background App Refresh, so uploads can continue.
  6. Check free storage in Settings > General > iPhone Storage. A full iPhone cannot save new audio.
  7. Remove the case or your hand from the microphone openings and record a 10-second test.

On a Mac, if the live transcript stops, open System Settings > Privacy & Security > Screen & System Audio Recording and make sure Otter is on.

Step 5: Otter recording missing? Do not reinstall

This is the most important rule in Otter's recording guide. When a conversation does not appear at all, the audio can still exist only on the device that recorded it. A reinstall deletes the app's local data, and that data can include the only copy.

  1. Do not delete or reinstall Otter.
  2. Keep the device online and open Otter.
  3. Wait a few minutes to see if the conversation uploads.
  4. If it does not appear, send diagnostics from the Otter app to Otter support. Otter says that its support team can then try to recover the conversation.

Long recordings and free plan limits

Some "not transcribing" reports are plan limits. Otter's Basic plan has a monthly minute allowance and a limit for each conversation, and Otter stops or cuts the transcript at that limit. Check your plan in Otter's account settings before you troubleshoot a recording that stopped at the same length each time.

On the desktop app, Otter can show "No conversation detected in the past 10 minutes" and stop the recording in 15 seconds. Click Keep recording if you are still in a quiet meeting.

A recorder that saves the audio before it transcribes

Otter is built for meetings: it joins calls, labels speakers, writes summaries, and shares notes with a team. Those features need its servers, so a connection problem can delay or break a transcript. If you mostly record voice notes, lectures, or ideas on your iPhone, an on-device recorder avoids the upload step.

Petal - AI Voice Recorder is an iPhone and Apple Watch app from Optimal Apps, the publisher of this site.

  • Audio first. Petal saves the audio file before transcription starts. If the app quits or the transcription fails, the recording is still on your iPhone, and Petal can recover it.
  • On-device transcription. After you download a speech model, Petal transcribes on the iPhone. A recording does not need to upload, so there is no "Live" state that waits for a server.
  • Searchable history. Each transcript goes into a history that you can search by the words in it. See how to search voice note transcripts on iPhone.
  • Apple Watch. The Watch app records on your wrist and hands the file to the system transfer, which finishes after the Watch app closes. Read how to record and transcribe on Apple Watch.
  • Live Activity. An active recording shows on the Lock Screen and in the Dynamic Island.

Petal does not join meetings or label speakers. The app is free to download, and Petal Pro is an optional subscription. For a full comparison, read Petal vs Otter or the Otter alternative for iPhone guide. If you also use Just Press Record, see Just Press Record transcription not working.

Questions

Why is my Otter recording stuck on Live?

A recording stays Live until the device that made it comes back online and finalizes it. Open Otter again on that same device, connect to a network, and keep the app open for a few minutes. Starting a new recording does not fix the old one.

How long can an Otter recording stay paused?

Otter's help center says a paused recording stays active for about 20 minutes. After that, Otter can finalize it automatically, and you cannot resume it. For a break longer than 15 minutes, stop and start a new recording.

Should I reinstall Otter if a recording is missing?

No. A recording that did not upload exists only on the device. A reinstall deletes the app data, which can delete that recording. Send diagnostics to Otter support from the app instead, so they can try to recover it.

Why does my Otter transcript have gaps?

Gaps usually come from a lost connection, closing Otter before the upload finished, a phone call that took the microphone, or a long pause. Keep Otter open until it finishes uploading and processing.

Is there an iPhone recorder that transcribes without the internet?

Petal - AI Voice Recorder transcribes on your iPhone after you download a speech model. It saves the audio file before transcription starts, so a failed transcription does not lose the recording.